Cadillac 2014 ELR Owner's Manual

Also see for 2014 ELR: Convenience/personalization guide Navigation manual Owner's manual Owner's manual Convenience/personalization guide

Contents

Black plate (60,1)Cadillac ELR Owner Manual (GMNA-Localizing-U.S./Canada-6081525) -2014 - crc - 10/8/135-60 Instruments and Controlshome automation devices. Theseinstructions refer to a garage dooropener, but can be used for otherdevices.Do not use the Universal Remotesystem with any garage door openerthat does not have the stop andreverse feature. This includes anygarage door opener modelmanufactured before April 1, 1982.Read these instructions completelybefore programming the UniversalRemote system. It may help to haveanother person assist with theprogramming process.Keep the original hand-heldtransmitter for use in other vehiclesas well as for future programming.Erase the programming whenvehicle ownership is terminated.See “Erasing Universal RemoteSystem Buttons” later in thissection.To program a garage door opener,park outside directly in line with andfacing the garage door openerreceiver. Clear all people andobjects near the garage door.Make sure the hand-held transmitterhas a new battery for quick andaccurate transmission of theradio-frequency signal.Programming the UniversalRemote SystemFor questions or help programmingthe Universal Remote system, call1-800-355-3515 or see www.homelink.com.Programming involvestime-sensitive actions, and may timeout causing the procedure to berepeated.To program up to three devices:1. Hold the end of the hand-heldtransmitter about 3 to 8 cm (1 to3 in) away from the UniversalRemote system buttons with theindicator light in view. Thehand-held transmitter wassupplied by the manufacturer ofthe garage door opener receiver.2. At the same time, press andhold both the hand-heldtransmitter button and one of thethree Universal Remote systembuttons to be used to operatethe garage door. Do not releaseeither button until the indicatorlight changes from a slow to arapid flash. Then release bothbuttons.Some garage door openers mayrequire substitution of Step 2with the procedure under in“Radio Signals for Canada andSome Gate Operators” later inthis section.3. Press and hold the newlyprogrammed Universal Remotesystem button for five secondswhile watching the indicator lightand garage door activation.. If the indicator light stays oncontinuously or the garagedoor moves when the