Cadillac 2014 ELR Owner's Manual

Also see for 2014 ELR: Convenience/personalization guide Navigation manual Owner's manual Owner's manual Convenience/personalization guide

Contents

Black plate (66,1)Cadillac ELR Owner Manual (GMNA-Localizing-U.S./Canada-6081525) -2014 - crc - 10/8/1310-66 Vehicle Care9. Press the on/off button (2) toturn the tire sealant andcompressor kit on.The compressor will injectsealant and air into the tire.The pressure gauge (3) willinitially show a high pressurewhile the compressor pushes thesealant into the tire. Once thesealant is completely dispersedinto the tire, the pressure willquickly drop and start to riseagain as the tire inflates withair only.10. Inflate the tire to therecommended inflationpressure using the pressuregauge (3). The recommendedinflation pressure can be foundon the Tire and LoadingInformation label. See TirePressure on page 10-48.The pressure gauge (3) mayread higher than the actual tirepressure while the compressoris on. Turn the compressor offto get an accurate pressurereading. The compressor maybe turned on/off until thecorrect pressure is reached.{ CautionIf the recommended pressurecannot be reached afterapproximately 25 minutes, thevehicle should not be drivenfarther. The tire is too severelydamaged and the tire sealant andcompressor kit cannot inflate thetire. Remove the power plug fromthe accessory power outlet andunscrew the inflating hose fromthe tire valve. See RoadsideService on page 13-5.11. Press the on/off button (2) toturn the tire sealant andcompressor kit off.The tire is not sealed and willcontinue to leak air until thevehicle is driven and thesealant is distributed in the tire;therefore, Steps 12–18 must bedone immediately afterStep 11.Be careful while handling thetire sealant and compressor kitas it could be warm afterusage.12. Unplug the power plug (8) fromthe accessory power outlet inthe vehicle.13. Turn the sealant/air hose (6)counterclockwise to remove itfrom the tire valve stem.14. Replace the tire valvestem cap.15. Replace the sealant/air hose(6), and the power plug (8)back in their original location.