Black plate (69,1)Cadillac ELR Owner Manual (GMNA-Localizing-U.S./Canada-6081525) -2014 - crc - 10/8/13Vehicle Care 10-696. Plug the power plug (8) into theaccessory power outlet in thevehicle. Unplug all items fromother accessory power outlets.See Power Outlets on page 5-6.If the vehicle has an accessorypower outlet, do not use thecigarette lighter.If the vehicle only has a cigarettelighter, use the cigarette lighter.Do not pinch the power plugcord in the door or window.7. Start the vehicle. The vehiclemust be running while using theair compressor.8. Press and turn the selectorswitch (1) clockwise to the AirOnly position.9. Press the on/off button (2) toturn the compressor on.The compressor will inflate thetire with air only.10. Inflate the tire to therecommended inflationpressure using the pressuregauge (3). The recommendedinflation pressure can be foundon the Tire and LoadingInformation label. See TirePressure on page 10-48.The pressure gauge (3) mayread higher than the actual tirepressure while the compressoris on. Turn the compressor offto get an accurate reading. Thecompressor may be turned on/off until the correct pressure isreached.If you inflate the tire higherthan the recommendedpressure you can adjust theexcess pressure by pressingthe pressure deflationbutton (4), if equipped, until theproper pressure reading isreached. This option is onlyfunctional when using the aironly hose (7).11. Press the on/off button (2) toturn the tire sealant andcompressor kit off.Be careful while handling thetire sealant and compressor kitas it could be warm afterusage.12. Unplug the power plug (8) fromthe accessory power outlet inthe vehicle.13. Disconnect the air only hose(7) from the tire valve stem byturning it counterclockwise, andreplace the tire valve stem cap.14. Replace the air only hose (7)and the power plug (8) andcord back in their originallocations.15. Place the equipment in theoriginal storage location in thevehicle.