108 INSTRUMENTS AND CONTROLScarefully loosen or thaw them.Damaged blades should be replaced.See Wiper Blade Replacement 0 262.Heavy snow or ice can overload thewiper motor.Wiper ParkingIf the ignition is put in OFF while thewipers are on LO, HI, or AUTO withRainsense disabled, they willimmediately stop.If the windscreen wiper lever is thenmoved to OFF before the driver door isopened or within 10 minutes after theignition is off, the wipers will restartand move to the base of thewindscreen.If the ignition is put in OFF while thewipers are performing wipes due towindscreen washing or Rainsense, thewipers continue to run until theyreach the base of the windscreen.Rainsense™With Rainsense, a sensor near the topcentre of the windscreen detects theamount of water on the windscreenand controls the sensitivity of thewindscreen wiper.Keep this area of the windscreen clearof debris to allow for best systemperformance.AUTO : If Rainsense is enabled, movethe windscreen wiper lever to AUTO.Turn the band on the wiper stalk toadjust the sensitivity.. Turn the band up for moresensitivity to moisture.. Turn the band down for lesssensitivity to moisture.. Move the windscreen wiper leverout of the AUTO position todeactivate Rainsense.To enable or disable this feature, see“Rainsense Wipers” under VehiclePersonalisation 0 150.Wiper Arm Assembly ProtectionWhen using an automatic car wash,move the windscreen wiper lever toOFF. This disables the automaticRainsense windscreen wipers.With Rainsense, if the transmission isin N (Neutral) and the vehicle speed isvery slow, the wipers willautomatically stop at the base of thewindscreen.The wiper operations return to normalwhen the transmission is no longer inN (Neutral) or the vehicle speed hasincreased.Rear Camera Mirror WasherIf equipped, push the windshieldwiper lever forward to spray washerfluid on the rear camera mirror. The
