Canon Arizona 6100 XTHF Mark II Series User Manual

Step and Repeat PrintingIntroductionStep and Repeat Printing allows the operator to define a grid and place an image in each cell toprint multiple copies. The operator selects the number of rows and columns desired and thenumber of copies needed and the copies of the image are positioned in each cell of the grid. Ifthere are not enough cells to hold the number of images the printer will wait for new media to beplaced and then continue the job. The next part of the job will begin on the topmost row of thegrid and print down until the set number of copies is achieved.Step and Repeat printing is also possible on prints that are set up for the Roll Media Option. Inthis case the grid is also shown in the Preview and is centered on the paper if there is enoughspace on both sides of the grid. If there is not enough space for the size of grid and number ofcopies, the job will continue further along the media and will start again at the position of the leftcolumn. The job continues in this manner until the set number of copies has printed.Step and Repeat SetupProcedure1. Select a print job from either the Active or Inactive job list.2. Select Step and Repeat in the Print Job Parameters panel.Step and Repeat Printing110 Chapter 6 - How to Print in Batch and Dual Origin Modes