Canon Arizona 6100 XTHF Mark II Series User Manual

Print White Ink JobsIntroductionWhite Ink can be printed in two ways:• Multiple Layers - Using a Quality-Layered print modeArizona Quality-Layered print mode is used to print white ink applications such as under-printing for non-white media, over-printing for backlit applications viewed 2nd surface or asmiddle layer for a day-night application.• Single Layer - Using any non Quality-Layered print mode that has been made with a CMYKSSink configuration with spot colors defined.Print modes other than Quality-Layered mode can also be used to print only white ink as longas the ONYX media profile (media model) has been made with a CMYKSS ink configurationwith spot colors defined.NOTEWhen you print white ink using a print mode other than Quality-Layered, werecommend that you don't print white ink in the same area of an image as CMYKinks. The white ink does not mix well with the other ink colors.Print a Multiple Layer Print Job with White InkFor Quality-Layered print mode jobs:1. Create spot data in a design application. SeeCreate Spot Data in Adobe Illustrator onpage 131 orCreate Spot Data in Photoshop on page 128.NOTENot required if only printing white ink using a printer generated white flood orusing the ONYX Spot Layer Tool to create spot data (step 3).2. Open the job in ONYX workflow software using an ONYX media profile that has been madeusing the Quality-Layered print mode (SeeConfigure ONYX Thrive for White Ink onpage 117 ).3. Create underlay or overlay spot data using the ONYX Spot Layer Tool. SeeCreate Spot Datawith the Spot Layer Tool on page 123NOTENot required if only printing white ink using a printer generated white flood orusing spot data created in a design application (step 1).4. If the desired layer definitions have not been predefined in the ONYX media profile orQuickset, select "Hold for Operator" prior to submitting the job to be printed, so that the jobwill not automatically be sent to the printer.Print White Ink JobsChapter 7 - How to Manage a White Ink Workflow 137