Canon Arizona 6100 XTHF Mark II Series User Manual

Operator Interface HardwareIntroductionThe operator interacts with printer components to print, maintain, and monitor the state of theprinter. This section identifies and explains the functions of the hardware.[1] Printer HardwareOperator Interface ComponentsHardware Interface ComponentsComponent Function1) Main Power Switch Turns the printer On and Off. See also 10) Vacuum Pump Box,which also has a power switch2) Emergency Stops Emergency stops shut down all motion and hazardous systems.Emergency Stop Buttons are installed on both ends of the Gantryand on the User Interface Desk. On either side of the Gantry a stopstrip is installed.3) Carriage Carrier for the printheads.4) Static Suppression Sys-temReduces static charge on the media. Results in less ink misting onthe printed image.5) Registration Pins Used to register the media.6) UV Lamps Used to cure the ink.7) Vacuum Gauge Displays the level of vacuum securing the media to the table.8) Print Start Button Starts the current print job.9) Automatic MaintenanceStationAutomatically cleans the printheads.4Operator Interface Hardware58 Chapter 3 - How to Navigate the User Interface