Canon Arizona 6100 XTHF Mark II Series User Manual

Configure ONYX Thrive for White InkIntroductionThis section describes how to configure ONYX Thrive to recognize white ink workflow elementsand thus allow you to apply the approach that is best for your print job application. In order forthe ONYX Thrive software to successfully address white ink workflow data, there are options inthe software that must be configured. It also explains how you need to use specific ONYX mediaprofiles to prepare white ink print jobs.Procedure1. In your Quick Set, or in Job Editor / Job Properties / PS/PDF Options turn off two-stage processing(make sure the box is not checked).ONYX Thrive software will now accept print jobs with white ink data.[4] Turn off Two Stage Processing2. To prepare a print job for white ink you need to use an ONYX media profile (media model).White Ink print jobs require media profiles with a particular ink configuration and spot colorsdefined. Media profiles for your printer are available from our website: https://graphiplaza.cpp.canonArizona Quality-Layered print mode is used to print white ink applications such as under-printingfor non-white media, over-printing for backlit applications viewed 2nd surface or as middle layerfor a day-night application.Configure ONYX Thrive for White InkChapter 7 - How to Manage a White Ink Workflow 117