Canon Arizona 6100 XTHF Mark II Series User Manual

Grounding (Finland; FI, Norway; NO, Sweden; SE and Denmark; DK)• FI: Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.• NO: Apparatet må tilkoples jordet stikkontact.• SE: Apparaten skall anslutas till jordat uttag.• DK: Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse tilstikproppens jord.Translation: The machine must be connected to a grounded power outlet.Radio interference suppression (all countries except USA)• Warning (CISPR11/EN55011): Operation of this equipment in a residential environment couldcause radio interference.Flicker (EEA including Switzerland)• This equipment is intended for use on premises having a service current capacity greater thanor equal to 100 A per phase. If it is observed that this equipment causes 'light flicker' to theenvironment, contact the supply authority in order to verify the service current capacitycorresponds to this requirement.FCC (USA)• This equipment has been tested and found to comply with the limits for a Class A digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference when the equipment is operated in a commercialenvironment. This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the User Documentation, may cause harmfulinterference to radio communications. Operation of this equipment in a residential area is likelyto cause harmful interference in which case the user will be required to correct the interferenceat his own expense.• Do not make any changes or modifications to the equipment unless otherwise specified in theUser Documentation. If you make such changes or modifications, you could be required to stopoperation of the equipment.• This equipment contains a certified modular transmitter. The transmitter’s FCC ID label islocated near the power rating label. The modular transmitter is located in the ink supply unitand can only be accessed by a service technician.ICES/NMB; Interference-causing equipment (Canada)• CAN ICES-1 (A)/NMB-1(A)Harmonics (EEA including Switzerland)• Equipment complying with EN61000-3-12Conformity declaration for Radio Equipment Directive; RED (EEA including Switzerland)• Hereby Canon Production Printing declares that the printer is in compliance with the essentialrequirements and other relevant provisions of Directive 2014/53/EU (RED). The product is CE-marked to show conformance with applicable legal requirements.Conformity declaration for Radio Law (Japan)This end device contains a radio device which is already approved by MIC AC-18004 for RadioLaw220 Chapter 12 - Regulation Notices