Canon Arizona 6100 XTHF Mark II Series User Manual

Maintenance TasksMaintenance tasks based on periodSeeMaintenance Guidelines on page 152 for the list of maintenance task and whether it isscheduled daily, weekly or monthly.Maintenance ToolsAuto-MaintenanceAMS is the automatic printhead maintenance system. The Auto-Maintenance menu allows theoperator to select the printhead that require nozzle recovery and to determine whether aStandard or Long purge is need for recovery (seeRecovering Nozzles by AMS on page 156).Clean AMSThe AMS must be cleaned daily to ensure good nozzle recovery. This menu allows the operatorto begin the cleaning cycle when it is ready for that operation (seeCleaning the AutomaticMaintenance System (AMS) on page 162).UV Bulb ReplacementThis menu provides a reminder that the bulbs must cool down to handle them, and then allowsthe operator to move the carriage to a location where the UV lamp housing can be reached (seeHow to Change a UV Lamp Bulb on page 172).Move CarriageMoves the carriage to a position where the underside can be cleaned.Maintenance TasksChapter 3 - How to Navigate the User Interface 71