96Testing the PostScript InstallationThe Adobe PostScript 3 personality is available as an option for the printer. Thedescriptions in this section assume that you have already purchased and installed theoptional A-32 module for the Adobe PostScript 3 printing.For more information about how to install the A-32 module on the printer, refer to theinstructions in the Getting Started Guide.Checking the menusOpen the page at the back of this guide so you can see the Menu Operation Flow. Withthe PostScript module installed, you should now be able to display and select itemsfrom the shaded menus in the chart.1 Press Go to take the printer off-line. The On Line indicator should go off. PAUSEDwill appear in the display.2 Press Menu to display the first menu name (PCL MENU) in the top line.3 Press Menu to display each of the menus listed below to check their settings.Refer to the Menu Operation Flow chart at the end of this manual for details of themenu items.n The PS MENU is now enabled and ready to use.n The MEMCONFIG MENU is also displayed if at least 8 MB of additional memoryhas been installed on the printer for context saving and simplex (one-sided) printing.n The PERSONALITY item under the PARALLEL1 MENU and the PARALLEL2MENU is now ready to use.n Under the TEST MENU, you can now select and print the PS Font List and PS DemoPage.Testing the PostScript Installation
