72 The Standard Printing Environment SettingsPARALLEL2 MENUShaded menus appear after an option has been installed. E.g. A-32 module withthe Adobe PostScript 3 software.If there is insufficient memory, MEMCONFIG may not appear, even after the A-32module has been installed.Press Go to take the printer off-linePress Menu to display the first menu nameThe PARALLEL2 MENU applies to the Compatible/Nibble mode interface.With Compatible/Nibble mode, a parallel port can support bi-directionalcommunications between your computer and its peripherals.PERSONALITY is displayed only after the A-32 module for Adobe PostScript 3 isinstalled. Until you install the A-32 module, PCL is the standard personality of your printer.With this setting you can set the parallel port for automatic personality switching ordedicate the parallel port for only one personality. This feature sets the personalityonly for printer streams received on the parallel port.AUTO The printer samples the print stream on the parallel port andautomatically switches to the personality required to print the job.PCL The parallel port is dedicated to the PCL personality and will printonly PCL data and will not switch to the PostScript personality ifa PostScript print stream is received on the parallel port. However,special commands sent to the printer with the print stream canforce the printer to switch to the PostScript personality.PERSONALITY=AUTO *
