1297Responding to Error MessagesAn internal ROM check error.If this error persists, call for service.An internal DRAM error.If this error persists, call for service.An NVRAM error.Performing a cold reset (see page 54). If this error persists, call forservice.An SRAM error in the AIR chip.If this error persists, call for service.You are pressing the Go button when you turn the printer on (seepage 54). The printer is ready to perform a cold reset and restorethe factory default settings.Release the Go button to perform the cold reset.The context saving items (PCL SAVE or PS3 SAVE) in theMEMCONFIG MENU have been adjusted automatically by theprinter operating system.This message is displayed when the printer has been turned on with thecontext saving feature enabled. However, due to manual changes to theprinter control panel, there is not enough memory to support the setup.Press Go to continue operation.You have pressed Go to go on-line after adjusting the contextsaving feature. The printer is allocating enough memory for thecontext save feature.Press Go to enable the new setting and resume operation.The cassette is not in the printer or is not correctly positioned.Install the indicated paper cassette in the printer. If the paper cassetteis in the printer, remove, insert it again and ensure it is securely inposition.The fixing roller is cleaning.Follow the instructions on page 155 to clean the fixing assembly usingthe operation panel menus.CONTEXT SAVECHANGE ( )CONTEXT SAVEADJUSTED ( )6F-61 ERRORCALL FOR SERVICE6F-63 ERRORCALL FOR SERVICE6F-68 ERRORCALL FOR SERVICE6F-7A ERRORCALL FOR SERVICECOLD RESETCASSETTE1MISSINGCLEANING PAGE
