Configuring System Information 279Configuring and Viewing sFlow Settings Using CLI CommandsFor information about the CLI commands that perform this function, see the sFlow Commands chapterin theCLI Reference Guide. The following table summarizes the equivalent CLI commands you use toconfigure and view sFlow settings.Industry Standard Discovery ProtocolThe Industry Standard Discovery Protocol (ISDP) is a proprietary Layer 2 network protocol that inter-operates with Cisco→devices running the Cisco Discovery Protocol (CDP). ISDP is used to shareinformation between neighboring devices. The switch software participates in the CDP protocol and isable to both discover and be discovered by other CDP-supporting devices.The ISDP menu contains links to the following pages:• ISDP Global Configuration• Cache Table• Interface Configuration• ISDP StatisticsISDP Global ConfigurationFrom the ISDP Global Configuration page, you can configure the ISDP settings for the switch, such asthe administrative mode.To access the ISDP Global Configuration page, click System →ISDP →Global Configuration in thenavigation tree.Table 6-66. sFlow Poll Configuration CommandsCLI Command Descriptionsflow polling Enables a new sflow poller instance for the data source if rcvr_idx isvalid.sflow polling (Interface Mode) Enable a new sflow poller instance for this data source if rcvr_idx isvalid.