584 Configuring RoutingFigure 9-42. VLAN Routing SummaryThe VLAN Routing Summary page displays the following fields:• VLAN ID — The ID of the VLAN whose data is displayed in the current table row.• MAC Address — The MAC Address assigned to the VLAN Routing Interface.• IP Address — The configured IP address of the VLAN Routing Interface.NOTE: If a VLAN is created and the IP address is not configured, the web page by default shows an IP address of0.0.0.0. To configure the IP address, go to the Routing →IP →Interface Configuration page. See "IP InterfaceConfiguration" on page 510.• Subnet Mask — The configured subnet mask of the VLAN Routing Interface. This is 0.0.0.0 when theVLAN Routing Interface is first configured and must be entered on the Routing →IP →InterfaceConfiguration page.Displaying the VLAN Routing Summary Using CLI CommandsFor information about the CLI commands that perform this function, see the following chapters in theCLI Reference Guide:• IP Addressing Commands• Virtual LAN Routing CommandsThe following table summarizes the equivalent CLI commands for this feature.Table 9-37. VLAN Routing Summary CommandsCLI Command Descriptioninterface vlan Enters the interface configuration (VLAN) mode.interface range vlan Enters the interface configuration mode to configure multiple VLANs.name Configures a name to a VLAN.show ip vlan Displays the VLAN routing information for all VLANs with routingenabled.vlan routing Enables routing on a VLAN.
