452 Configuring Switching Information• VLAN ID — Select the VLAN for which information to be displayed or configured for the DHCPsnooping application.• DHCP Snooping Mode — Enables or disables the DHCP snooping feature on the selected VLAN.The default is Disable.Displaying the DHCP Snooping VLAN Summary Table1. Open the DHCP Snooping VLAN Configuration page.2. Click Show All.The DHCP Snooping VLAN Summary table displays.Figure 7-118. DHCP Snooping VLAN SummaryConfiguring DHCP Snooping VLANs With CLI CommandsFor information about the CLI commands that perform this function, refer to the following chapter intheCLI Reference Guide:• DHCP Snooping CommandsThe following table summarizes the equivalent CLI commands for this feature.DHCP Snooping Persistent ConfigurationUse the DHCP Snooping Persistent Configuration page to configure the persistent location of theDHCP snooping database. This location can be local or remote on a given IP machine. For moreinformation about DHCP bindings and the DHCP Snooping database, see "DHCP Snooping StaticBindings Configuration" on page 454.To access the DHCP Snooping Persistent Configuration page, click Switching →DHCP Snooping →Persistent Configuration in the navigation tree.Table 7-67. DHCP Snooping VLAN CommandsCLI Command Descriptionip dhcp snooping Enables DHCP snooping globally or on a specific VLAN.
