570 Configuring RoutingRIP Route Redistribution SummaryUse the RIP Route Redistribution Summary page to display Route Redistribution configurations.To display the page, click Routing →RIP →Route Redistribution Summary in the tree view.Figure 9-32. RIP Route Redistribution SummaryThe RIP Route Redistribution Summary page contains the following fields:• Source — The source route to be redistributed by RIP.• Metric — The metric of redistributed routes for the given source route. Displays 0 when notconfigured.• Redistribute — Shows whether route redistribution is enabled for the source.• Distribute List — The access list that filters the routes to be redistributed by the destination protocol.If the distribute list is not configured, the field is blank.• Match — Shows the list of routes redistributed when OSPF is selected as the source, which can be anyof the following:– Match Internal — Shows whether redistribution of OSPF internal routes is enabled.– Match External Type 1 — Shows whether the redistribution of OSPF external type 1 routes isenabled.– Match External Type 2— Shows whether the redistribution of OSPF external type 2 routes isenabled.– Match NSSA External Type 1 — Shows whether the redistribution of OSPF NSSA external type 1routes is enabled.– Match NSSA External Type 2— Shows whether the redistribution of OSPF NSSA external type 2routes is enabled.
