764 Configuring IP MulticastInterface Membership Information—DetailedThe Interface Membership Information—Detailed page provides additional information on the IPmulticast groups for which the MLD proxy interface has received membership reports. To display thispage, click IPv6 Multicast →MLD →Proxy Interface →Interface Membership Info Detailed in thenavigation tree.Figure 12-32. Interface Membership Information—DetailedThe Interface Membership Information — Detailed page contains the following fields:• Interface — Select the interface on which MLD proxy is enabled for which data is to be displayed.• Multicast Group IP — Select the IP multicast group address for which data is to be displayed. If nogroup membership reports have been received on the selected MLD Proxy interface you will not beable to make this selection, and none of the non-configurable data will be displayed.• Source Address — This parameter shows source addresses which are members of this multicastaddress.• Expiry Time — Displays the expiry time in hours:minutes:seconds since the entry was created in thecache table.• Click Refresh to refresh the data on the screen with the present state of the data in the router.DisplayingIPv6 MLD Membership Detailed Information Using CLI CommandsFor information about the CLI command that performs this function, see the following chapter in theCLI Reference Guide:• IPv6 Routing CommandsTable 12-30. IPv6 MLD Membership Information CommandCLI Command Descriptionshow ipv6 mld-proxy groups Displays information about multicast groups that the MLD Proxyreported.
