420 Configuring Switching InformationModifying LLDP Interface Settings for Multiple Ports1. Open the LLDP Configuration page.2. Click Show All.The LLDP Interface Settings Table displays.3. Click Edit for each Unit/Port to modify.4. Edit the LLDP Interface fields as needed.5. Click Apply Changes.The LLDP Interface settings are modified, and the device is updated.Configuring LLDP with CLI CommandsFor information about the CLI commands that perform this function, see the following chapter in theCLI Reference Guide:• LLDP CommandsThe following table summarizes the equivalent CLI commands for this feature.LLDP StatisticsUse the LLDP Statistics page to view LLPD-related statistics.To display the LLDP Statistics page, click Switching →LLDP →LLDP Statistics in the tree view.Table 7-50. LLDP CommandsCLI Command Descriptionlldp notification Enables remote data change notifications.lldp notification-interval Limits how frequently remote data change notifications are sent.lldp receive Enables the LLDP receive capability.lldp timers Sets the timing parameters for local data transmission on ports enabledfor LLDP.lldp transmit Enables the LLDP advertise capability.lldp transmit-mgmt Specifies that transmission of the local system management addressinformation in the LLDPDUs is included.lldp transmit-tlv Specifies which optional TLVs in the 802.1AB basic management setwill be transmitted in the LLDPDUs.show lldp Displays the current LLDP configuration summary.
