Configuring Routing 509• IcmpInParmProbs — The number of ICMP Parameter Problem messages received.• IcmpInSrcQuenchs — The number of ICMP Source Quench messages received.• IcmpInRedirects — The number of ICMP Redirect messages received.• IcmpInEchos — The number of ICMP Echo (request) messages received.• IcmpInEchoReps — The number of ICMP Echo Reply messages received.• IcmpInTimestamps — The number of ICMP Timestamp (request) messages received.• IcmpInTimestampReps — The number of ICMP Timestamp Reply messages received.• IcmpInAddrMasks — The number of ICMP Address Mask Request messages received.• IcmpInAddrMaskReps — The number of ICMP Address Mask Reply messages received.• IcmpOutMsgs — The total number of ICMP messages which this entity attempted to send. Note thatthis counter includes all those counted by icmpOutErrors.• IcmpOutErrors — The number of ICMP messages which this entity did not send due to problemsdiscovered within ICMP such as a lack of buffers. This value should not include errors discoveredoutside the ICMP layer such as the inability of IP to route the resultant datagram. In someimplementations there may be no types of error which contribute to this counter's value.• IcmpOutDestUnreachs — The number of ICMP Destination Unreachable messages sent.• IcmpOutTimeExcds — The number of ICMP Time Exceeded messages sent.• IcmpOutParmProbs — The number of ICMP Parameter Problem messages sent.• IcmpOutSrcQuenchs — The number of ICMP Source Quench messages sent.• IcmpOutRedirects — The number of ICMP Redirect messages sent. For a host, this object is alwayszero, since hosts do not send redirects.• IcmpOutEchos — The number of ICMP Echo (request) messages sent.• IcmpOutEchoReps — The number of ICMP Echo Reply messages sent.• IcmpOutTimestamps — The number of ICMP Timestamp (request) messages.• IcmpOutTimestampReps — The number of ICMP Timestamp Reply messages sent.• IcmpOutAddrMasks — The number of ICMP Address Mask Request messages sent.• IcmpOutAddrMaskReps — The number of ICMP Address Mask Reply messages sent.Refreshing IP Statistics1. Open the IP Statistics page.2. Click Refresh.The screen displays with the present state of the data in the switch.
