634 Configuring IPv6DHCPv6 Server Bindings SummaryUse the Server Bindings Summary page to display all DHCPv6 server bindings.To display the page, click IPv6 →DHCPv6 →Bindings Summary in the tree view.Figure 10-13. Server Bindings SummaryThe Server Bindings Summary page contains the following fields:• Client Address — Specifies the IPv6 address of the client associated with the binding.• Client Interface — Specifies the interface number where the client binding occurred.• Client DUID — Specifies client's DHCPv6 unique identifier.• Prefix - Specifies the type of prefix associated with this binding.• Expiry Time — Specifies the number of seconds until the prefix associated with a binding expires.• Valid Lifetime — Specifies the valid lifetime value in seconds of the prefix associated with a binding.• Prefer Lifetime — Specifies the preferred lifetime value in seconds of the prefix associated with abinding.Displaying Server Bindings Using CLI CommandsFor information about the CLI commands that perform this function, see the following chapter in theCLI Reference Guide:• DHCPv6 CommandsThe following table summarizes the equivalent CLI commands for this feature.Table 10-11. DHCPv6 Binding CommandsCLI Command Descriptionshow ipv6 dhcp binding Displays the configured DHCP pool.
