338 Configuring Switching Information• VLAN ID — Displays the VLAN Tag value.• MAC Address— Displays the MAC address.• Interface — Displays the port number.Defining the Aging Time1. Open the Dynamic Address Table page.2. Define the Address Aging field.3. Click Apply Changes.The aging time is modified, and the device is updated.Querying the Dynamic Address Table1. Open the Dynamic Address Table page.2. Define the parameter by which to query the Dynamic Address Table.Entries can be queried by Interface, LAG, MAC Address, or VLAN ID.3. Click Query to query the Dynamic Address Table.Removing Data From the Dynamic Address Table1. Open the Dynamic Address Table page.2. Check Clear Table.3. Click Apply Changes.The Dynamic Address Table is cleared of all data.Querying and Sorting Dynamic Addresses Using CLI CommandsFor information about the CLI commands that perform this function, see the following chapter in theCLI Reference Guide:• Address Table CommandsThe following table summarizes the equivalent CLI commands for this feature.Table 7-19. Dynamic Address Table CommandsCLI Command Descriptionshow bridge address-table Displays dynamically created entries in the bridge forwarding database.bridge aging-time Sets the aging time of the address.clear bridge Removes any learned entries from the forwarding database.
