Eaton SEFELEC 5 Series User Manual

User manual SEFELEC 5x Series 118 v1.06GROUND CONTINUITY RESISTANCE MEASUREMENTCONNECTION OF THE COMPONENT TO BE MEASUREDWARNINGWARNING: The accessories must only be handled by qualified personnel. Only use accessories with the device or devices for which they are intended. Thesafety of the operator and the proper functioning of the device used depend on therespect of this rule. Do not try to modify an accessory; measurement accessories may contain imita-tion and protection elements. It is forbidden to modify the accessories withoutwritten agreement from SEFELEC-EATON. If the device is used in conditions other than those specified in the manual of thedevice, potential risks may occur for the safety of the user. ALWAYS observe the safety rules relating to the use of High Current equipment. Never touch the metal tip of an accessory connected to a device. Do not use accessories that are in poor condition, incomplete or defective. Checkthe integrity of the accessory before every use. Respect the conditions of use specified in the instructions of the associatedmeasurement devices. Do not use an accessory in the place of another, just because it looks the same.Each accessory is designed for a specific use and in strict association with ameasurement device. More than one person should never use the same measurement accessories at thesame time.