CHAPTER 5: SETTINGS PRODUCT SETUPN60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL 5-955Each control pushbutton asserts its own FlexLogic operand. Each operand need to be configured appropriately to performthe required function. Each operand remains asserted as long as the pushbutton is pressed and resets when thepushbutton is released. A dropout delay of 100 ms is incorporated to ensure fast pushbutton manipulation is recognizedby various features that can use control pushbuttons as inputs.An event is logged in the event record (as per user setting) when a control pushbutton is pressed. No event is logged whenthe pushbutton is released. The faceplate keys (including control keys) cannot be operated simultaneously—a given keymust be released before the next one can be pressed.The control pushbuttons become user-programmable only if the breaker control feature is not configured for manualcontrol via the USER 1 through 3 pushbuttons as shown. If configured for manual control, breaker control typically uses thelarger, optional user-programmable pushbuttons, making the control pushbuttons available for other user applications.Figure 5-35: Control pushbutton logic5.3.14 User-programmable pushbuttonsSETTINGS PRODUCT SETUP USER-PROGRAMMABLE PUSHBUTTONS USER PUSHBUTTON 1(16) USER PUSHBUTTON 1 PUSHBUTTON 1FUNCTION: DisabledRange: Self-Reset, Latched, Disabled PUSHBTN 1 ID TEXT: Range: up to 20 alphanumeric characters PUSHBTN 1 ON TEXT: Range: up to 20 alphanumeric characters PUSHBTN 1 OFF TEXT: Range: up to 20 alphanumeric characters PUSHBTN 1 HOLD:0.0 sRange: 0.0 to 10.0 s in steps of 0.1 PUSHBTN 1 SET:OffRange: FlexLogic operand PUSHBTN 1 RESET:OffRange: FlexLogic operand PUSHBTN 1 AUTORST:DisabledRange: Disabled, Enabled PUSHBTN 1 AUTORSTDELAY: 1.0 sRange: 0.2 to 600.0 s in steps of 0.1 PUSHBTN 1 REMOTE:OffRange: FlexLogic operand PUSHBTN 1 LOCAL:OffRange: FlexLogic operand842010A2.CDRCONTROL PUSHBUTTON1 FUNCTION:SYSTEM SETUP/BREAKERS/BREAKER 1/BREAKER 1 PUSHBUTTON:CONTROLSYSTEM SETUP/BREAKERS/BREAKER 2/BREAKER 2 PUSHBUTTON:CONTROLSETTINGSETTINGSTIMER FLEXLOGIC OPERANDEnabled=1Enabled=1When applicableEnabled=1RUNOFFONAND100 msec0 CONTROL PUSHBTN 1 ON{
