N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL 4-1N60 Network Stability and SynchrophasorMeasurement SystemChapter 4: InterfacesInterfacesThis chapter explains the EnerVista software interface, the front panel interface, and logic diagrams.4.1 EnerVista software interface4.1.1 IntroductionThe EnerVista UR Setup software provides a single facility to configure, monitor, maintain, and troubleshoot relay functions,connected over local or wide area communication networks. It can be used while disconnected (offline) or connected(online) to a UR device. In offline mode, settings files can be created for eventual downloading to the device. In onlinemode, you communicate with the device in real-time.The EnerVista UR Setup software is provided with every N60. This chapter outlines the EnerVista software interfacefeatures. The EnerVista UR Setup Help File also provides details for getting started and using the software interface.4.1.2 Settings filesThe EnerVista software supports the following three ways of handling changes to relay settings:• In offline mode (relay disconnected) to create or edit relay settings files for later download to relays• While connected to a communicating relay to modify directly any relay settings via relay data view windows, and thensave the settings to the relay• Create/edit settings files and then write them to the relay while connected to the relaySettings files are organized on the basis of file names assigned by the user. A settings file contains data pertaining to thefollowing types of relay settings:• Device definition• Product setup• System setup• FlexLogic• Grouped elements• Control elements• Inputs/outputs• Remote resources
