6-26 N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUALPRODUCT INFORMATION CHAPTER 6: ACTUAL VALUES6The order code, serial number, Ethernet MAC address, date and time of manufacture, and operating time are shown here.The rear panel on the device contains similar information.6.5.2 Firmware revisionsACTUAL VALUES PRODUCT INFO FIRMWARE REVISIONSThe shown data is illustrative only. A modification file number of 0 indicates that, currently, no modifications have beeninstalled. SERIAL NUMBER: Range: standard GE serial number format ETHERNET MAC ADDRESS000000000000Range: standard Ethernet MAC address format MANUFACTURING DATE:0Range: YYYY/MM/DD HH:MM:SS OPERATING TIME:0:00:00Range: operating time in HH:MM:SS PMU FEATURE ACTIVE:NoRange: Yes, No CT/ VT ADVANCED DIAGACTIVE: NoRange: Yes, No LAST SETTING CHANGE:1970/01/01 23:11:19Range: YYYY/MM/DD HH:MM:SS FIRMWARE REVISIONS N60 RelayREVISION: 7.3xRange: 0.00 to 655.35Revision number of the application firmware. MODIFICATION FILENUMBER: 0Range: 0 to 65535 (ID of the MOD FILE)Value is 0 for each standard firmware release. BOOT PROGRAMREVISION: 7.01Range: 0.00 to 655.35Revision number of the boot program firmware. FRONT PANEL PROGRAMREVISION: 2.01Range: 0.00 to 655.35Revision number of faceplate program firmware. COMPILE DATE:2013/09/15 04:55:16Range: YYYY/MM/DD HH:MM:SSDate and time when product firmware was built. BOOT DATE:2013/09/15 16:41:32Range: YYYY/MM/DD HH:MM:SSDate and time when the boot program was built. FPGA PROGRAM:REVISION: 01.05Range: 0.00 to 655.35Revision number for FPGA. FPGA DATA:2013/09/15 16:41:32Range: YYYY/MM/DD HH:MM:SSDate and time when the FPGA was built.
