190-01146-00 Rev. AGarmin G950 Pilot’s Guide for the Tecnam P2006T94AUDIO PANEL AND CNSSYSTEMOVERVIEWFLIGHTINSTRUMENTSEISAUDIO PANEL& CNSFLIGHTMANAGEMENTHAZARDAVOIDANCEAFCSADDITIONALFEATURESAPPENDICESINDEXNAV radios are selected for listening by pressing the corresponding keys on the Audio Panel. Pressing theNAV1, NAV2, DME, or ADF Key selects and deselects the navigation radio source. Selected audio can be heardover the headset and the speakers (if selected). All radios can be selected individually or simultaneously.Figure 4-18 Selecting a NAV Radio ReceiverNAV RECEIVER MANUAL TUNINGThe NAV frequency controls and frequency boxes are on the left side of the MFD and PFDs.Manually tuning a NAV frequency:1) Turn the NAV Knob to tune the desired frequency in the NAV Tuning Box.2) Press the Frequency Transfer Key to transfer the frequency to the NAV Active Frequency Field.3) Adjust the volume level with the NAV VOL/ID Knob.4) Press the NAV VOL/ID Knob to turn the Morse code identifier audio on and off.Figure 4-19 NAV Frequency TuningPress theFrequency Transfer Key toTransfer NAV Frequencies BetweenActive and Standby Frequency FieldsTurn theNAV Knob toTune the Frequency inthe Tuning BoxTurnVOL/ID Knob to adjustvolume. Press Knob to TurnMorse Code On or Off.