Garmin G950 Pilot’s Guide for the Tecnam P2006T 190-01146-00 Rev. A164FLIGHT MANAGEMENTSYSTEMOVERVIEWFLIGHTINSTRUMENTSEISAUDIO PANEL& CNSFLIGHTMANAGEMENTHAZARDAVOIDANCEAFCSADDITIONALFEATURESAPPENDICESINDEXUSER WAYPOINTSThe G950 can create and store up to 1,000 user-defined waypoints. User waypoints can be created from anymap page (except PFD Inset Map, AUX-Trip Planning Page, or Procedure Pages) by selecting a position on themap using the Joystick, or from the User Waypoint Information Page by referencing a bearing/distance froman existing waypoint, bearings from two existing waypoints, or latitude and longitude. Once a waypoint hasbeen created, it can be renamed, deleted, or moved. Temporary user waypoints are erased upon system powerdown.Figure 5-42 User Waypoint Information PageSelected UserWaypointNavigation MapShowing SelectedUser WaypointUser Waypoint List- Identifier- CommentSoftkeys# User Wpts UsedGO BACK displayed ifUser Wpt was createdon map pageUser Wpt CommentUser Waypoint Info- Identifier- Temporary/Normal- Waypoint TypeReference Wpt/Info- Identifier/Rad/Dist or- Identifiers/Radials or- Region/Lat/LongSelecting a User Waypoint:1) With the User Waypoint Information Page displayed, enter the name of the User Waypoint, or scroll to thedesired waypoint in the User Waypoint List using the large FMS Knob.2) Press the ENT Key.3) Press the FMS Knob to remove the flashing cursor.Or:1) With the Nearest User Waypoints Page displayed, press the FMS Knob.2) Press the ENT Key or turn either FMS Knob to select an identifier in the Nearest USR Box.3) Press the FMS Knob to remove the flashing cursor.