Garmin G950 Pilot’s Guide for the Tecnam P2006T 190-01146-00 Rev. A142FLIGHT MANAGEMENTSYSTEMOVERVIEWFLIGHTINSTRUMENTSEISAUDIO PANEL& CNSFLIGHTMANAGEMENTHAZARDAVOIDANCEAFCSADDITIONALFEATURESAPPENDICESINDEXFigure 5-25 Navigation Map Setup Menu -TRACK VECTOR, WIND VECTOR, NAV RANGE RING, FUEL RANGE RING SetupTrack Vector- On/Off- Look Ahead TimeFuel Range- On/Off- Fuel Reserve TimeWind Vector On/OffNav Range Ring On/OffWIND VECTORThe map displays a wind vector arrow in the upper right-hand portion of the screen. Wind vector informationis displayed as a white arrow pointing in the direction in which the wind is moving for wind speeds greater thanor equal to 1 kt.Figure 5-26 Navigation Map - Wind VectorWind Direction Wind SpeedNOTE: The wind vector is not displayed until the aircraft is moving. It is not displayed on the WaypointInformation pages.Displaying/removing the wind vector:1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.2) Press the ENT Key. The Map Setup Menu is displayed.3) Select the ‘Map’ group.4) Press the ENT Key.5) Highlight the ‘WIND VECTOR’ field.6) Select ‘On’ or ‘Off’.7) Press the FMS Knob to return to the Navigation Map Page.
