Garmin G950 Pilot's Manual

Also see for G950: Installation and maintenance manual Pilot's guide

Contents

190-01146-00 Rev. A Garmin G950 Pilot’s Guide for the Tecnam P2006T 21SYSTEM OVERVIEWSYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEXPFD SOFTKEYSThe CDI, IDENT, TMR/REF, NRST, and ALERTS softkeys undergo a momentary change to black text ongray background and automatically switch back to white text on black background when selected.The PFD softkeys provide control over flight management functions, including GPS, NAV, terrain, traffic,and lightning (optional). Each softkey sublevel has a BACK Softkey which can be selected to return to theprevious level. The ALERTS Softkey is visible at all softkey levels (label changes if messages are issued).INSET Displays Inset Map in PFD lower left cornerOFF Removes Inset MapDCLTR (3) Selects desired amount of map detail; cycles through declutter levels:DCLTR (No Declutter): All map features visibleDCLTR-1: Declutters land dataDCLTR-2: Declutters land and SUA dataDCLTR-3: Removes everything except for the active flight planTRAFFIC Displays traffic information on Inset MapTRAFFIC: No Traffic displayed on Inset MapTRFC-1: Traffic displayed on Inset MapTRFC-2: Traffic Only display shownTOPO Displays topographical data (e.g., coastlines, terrain, rivers, lakes) and elevationscale on Inset MapTERRAIN Displays terrain information on Inset MapPFD Displays second-level softkeys for additional PFD configurationsDFLTS Resets PFD to default settings, including changing units to standardWIND Displays softkeys to select wind data parametersOPTN 1 Displays headwind/tailwind and crosswind arrows with numeric speed componentsOPTN 2 Displays wind direction arrow with numeric speedOPTN 3 Displays wind direction arrow with numeric headwind/tailwind and cross-windspeed componentsOFF Information not displayedBRG1 Cycles the Bearing 1 Information Window through NAV1 or GPS waypoint identifierand GPS-derived distance information, and ADF/frequency.HSI FRMT Displays the softkeys for selecting the two HSI formats360 HSI Displays HSI as a 360° compass roseARC HSI Displays HSI as a 140° viewable arcBRG2 Cycles the Bearing 2 Information Window through NAV2 or GPS waypoint identifierand GPS-derived distance information, and ADF/frequency.ALT UNIT Displays softkeys for setting the altimeter and BARO settings to metric unitsMETERS When enabled, displays altimeter in metersIN Press to display the BARO setting as inches of mercuryHPA Press to display the BARO setting as hectopacalsSTD BARO Sets barometric pressure to 29.92 in Hg (1013 hPa if metric units are selected)