113Section 6GPS ReceiverReferenceCopy— allows you to copy the selected route to anew route. The copy function can be used to save aTracBack route for future use. The copy function is alsouseful for duplicating an existing route before makingchanges.To copy a route:1. Highlight ‘Copy’ and press ENTER.2. The Route Plan Page will appear for the duplicateroute and the name for the new route will be thefirst and last waypoints in the route. If this name isidentical to the original route name or any othersaved route, then a number will be added to theend of the name to create a unique name.Delete Route— allows you to remove the selectedroute from memory. The waypoints contained in theroute will still appear in memory, but not as part of theroute.To delete a route from memory:1. Highlight ‘Delete Route’ and press ENTER. Aconfirmation page will appear.2. Press ENTER to delete the route or QUIT to cancel.Delete All— allows you to remove all routes frommemory. The waypoints contained in all stored routeswill remain in memory, but not as part of any route.To delete all routes from memory:1. Highlight ‘Delete All’ and press ENTER. Aconfirmation page will appear.2. Press ENTER to delete all routes or QUIT to cancel.Route EditingOnce a route is added to memory, you can reviewand/or edit the route from the Route Plan Edit Page. TheRoute Plan Edit Page shows the sequence of waypoints forthe selected route and provides additional options toinsert waypoints, remove waypoints or perform trip/fuelplanning functions.‘Copy’ allows you tomake a duplicate of aroute before makingediting changes.‘Delete’ will remove theroute from memory,but not the waypointscontained in the route.
