48Section 4Cell PhoneReferenceScanning for Cellular ServiceThe scanning feature allows you to access cellularservice in the order and selection made on this page.Select Home to scan for your Home system first. You canenter SID’s to the Preferred SID list and scan for thosenumbers next. If you select A then B, the phone will scanfor a Side A system first, then for a Side B system. Youcan choose any combination of A/B Side scanning. ThePreferred SID List holds the SID’s that you have selectedwhich will be scanned when you check the Preferred Listbox. The Status Bar at the base of the display indicateswhich type of service is active. Home = H, Preferred SID’s= P, Side A Systems = A and Side B Systems = B. Emer-gency calling will override scan settings and use anyavailable system. Scanning may be necessary for aircellular use and should remain active in case a non-homeSID is in use. Scanning selections for the AIR and NAMare set at the factory and cannot be changed while usingthis setup page. The status bar will always show “Home”for AIR use, even when using the non-home SID.To access scanning preferences:1. Highlight the padlock symbol and press ENTER.2. Enter your password using the phone keypad andpress ENTER.3. Scroll through the Home, Preferred List and systempreference boxes and check those that you desire toscan. The preferred SID List can hold up to 15entries per NAM programmed by you or your serviceprovider.The home system depends on the current NAMselection. Contact your cellular service provider forinformation about their roaming agreements with othercompanies. In some areas, scanning phones areautomatically recognized by cellular systems with aroaming agreement. In others, you must contact thecellular provider before they can recognize your phone.Secured Scanning Pageinformation is program-mable to meet yourroaming requirements