Service Manual February 2017Turntable Rotation Components138 S-80 • S-85 • S-80X Part No. 1259369GT3 Push the backlash pivot plate towards theturntable as far as possible (this will push therotation gear into the turntable bearing ringgear).4 Loosen the lock nut on the adjustment bolt.5 Turn the adjustment bolt clockwise until itcontacts the backlash pivot plate.6 Turn the adjustment bolt one half turncounterclockwise. Tighten the lock nut on theadjustment bolt.7 Rotate the backlash pivot plate away from theturntable until it contacts the adjustment bolt.Then torque the mounting fasteners on thebacklash pivot plate. Refer to Specifications,Machine Torque Specifications.8 Rotate the turntable through an entire rotation.Check for tight spots that could cause binding.Readjust if necessary.
