Service Manual February 2017Checklist A Procedures26 S-80 • S-85 • S-80X Part No. 1259369GTA-8Check the High PressureHydraulic Filter ConditionIndicatorGenie specifications require that this procedure beperformed every 8 hours or daily, whichever comesfirst.Maintaining the high pressure hydraulic filter ingood condition is essential to good systemperformance and safe machine operation. The filtercondition indicator will show when the hydraulicflow is bypassing a clogged filter. If the filter is notfrequently checked and replaced, impurities willremain in the hydraulic system and causecomponent damage.1 Open the engine side turntable cover.2 Start the engine from the ground controls.3 Change the engine idle to high rpm (rabbitsymbol).4 Visually inspect the filter condition indicator.Result: The filter condition indicator should beoperating with the plunger in the green area.Result: If the indicator displays the plunger inthe red area, this indicates that the hydraulicfilter is being bypassed and the filter should bereplaced. Refer to Maintenance Procedure,Replace the Hydraulic Filters.A-9Perform 30-Day ServiceThe 30-day maintenance procedure is a one timeprocedure to be performed after the first 30 days or40 hours of usage. After this interval, refer to themaintenance tables for continued scheduledmaintenance.1 Perform the following maintenanceprocedures:• A-12 Grease the Turntable RotationBearing and Rotate Gear• B-8 Inspect the Tires, Wheels and LugNut Torque• B-9 Check the Drive Hub Oil Level andFastener Torque• B-21 Inspect the Boom Extend/RetractCables• D-3 Check the Turntable RotationBearing Bolts• D-5 Replace the Hydraulic FilterElements
