1-5Configuring User Port AttributesConfigure the user ports as hybrid ports that permit packets of the specified user VLAN to pass, andconfigure the user VLAN to which the user ports belong as the default VLAN.Configure the user ports to permit packets of the multicast VLAN to pass and untag the packets. Thus,upon receiving multicast packets tagged with the multicast VLAN ID from the upstream device, theLayer 2 device untags the multicast packets and forwards them to its downstream device.Follow these steps to configure user port attributes:To do... Use the command... RemarksEnter system view system-view —interface interface-typeinterface-numberEnter interface view or portgroup view port-group { manualport-group-name |aggregation agg-id }RequiredUse either commandConfigure the user port linktype as hybrid port link-type hybrid RequiredAccess by defaultSpecify the user VLAN thatcomprises the current userport(s) as the default VLANport hybrid pvid vlan vlan-id RequiredVLAN 1 by defaultConfigure the current userport(s) to permit packets of thespecified multicast VLAN(s) topass and untag the packetsport hybrid vlan vlan-id-listuntaggedRequiredBy default, a hybrid port permitsonly packets of VLAN 1 to pass.For details about the port link-type, port hybrid pvid vlan, and port hybrid vlan commands, refer toVLAN Commands in the Access Volume.Configuring Multicast VLAN PortsIn this approach, you need to configure a VLAN as a multicast VLAN and then assign user ports to thismulticast VLAN by either adding the user ports in the multicast VLAN or specifying the multicast VLANon the user ports. These two configuration methods give the same result.Configuring multicast VLAN ports in multicast VLAN viewFollow these steps to configure multicast VLAN ports in multicast VLAN view:To do... Use the command... RemarksEnter system view system-view —
