1-31z It is recommended to specify only the primary HWTACACS authentication server if backup is notrequired.z If both the primary and secondary authentication servers are specified, the secondary one is usedwhen the primary one is not reachable.z The IP addresses of the primary and secondary authentication servers cannot be the same.Otherwise, the configuration fails.z You can remove an authentication server only when no active TCP connection for sendingauthentication packets is using it.Specifying the HWTACACS Authorization ServersFollow these steps to specify the HWTACACS authorization servers:To do… Use the command… RemarksEnter system view system-view —Enter HWTACACS schemeviewhwtacacs schemehwtacacs-scheme-name —Specify the primaryHWTACACS authorizationserverprimary authorizationip-address [ port-number ]Specify the secondaryHWTACACS authorizationserversecondary authorizationip-address [ port-number ]RequiredConfigure at least one of thecommandsNo authorization server bydefaultz It is recommended to specify only the primary HWTACACS authorization server if backup is notrequired.z If both the primary and secondary authorization servers are specified, the secondary one is usedwhen the primary one is not reachable.z The IP addresses of the primary and secondary authorization servers cannot be the same.Otherwise, the configuration fails.z You can remove an authorization server only when no active TCP connection for sendingauthorization packets is using it.Specifying the HWTACACS Accounting ServersFollow these steps to specify the HWTACACS accounting servers and perform related configurations:To do… Use the command… RemarksEnter system view system-view —
