1-5Public Key Configuration ExamplesConfiguring the Public Key of a Peer ManuallyNetwork requirementsDevice A is authenticated by Device B when accessing Device B, so the public key of Device A shouldbe configured on Device B in advance.In this example:z RSA is used.z The host public key of Device A is configured manually on Device B.Figure 1-2 Network diagram for manually configuring the public key of a peerConfiguration procedure1) Configure Device A# Create RSA key pairs on Device A. system-view[DeviceA] public-key local create rsaThe range of public key size is (512 ~ 2048).NOTES: If the key modulus is greater than 512,It will take a few minutes.Press CTRL+C to abort.Input the bits of the modulus[default = 1024]:Generating Keys...++++++++++++++++++++++++++++# Display the public keys of the created RSA key pairs.[DeviceA] display public-key local rsa public=====================================================Time of Key pair created: 09:50:06 2007/08/07Key name: HOST_KEYKey type: RSA Encryption Key=====================================================Key code:30819F300D06092A864886F70D010101050003818D0030818902818100D90003FA95F5A44A2A2CD3F814F9854C4421B57CAC64CFFE4782A87B0360B600497D87162D1F398E6E5E51E5E353B3A9AB16C9E766BD995C669A78
