1-16Root dispersion: 0.00 msPeer dispersion: 0.00 msReference time: 00:00:00.000 UTC Jan 1 1900 (00000000.00000000)# Specify Device A as the NTP server of Device B so that Device B is synchronized to Device A. system-view[DeviceB] ntp-service unicast-server 1.0.1.11# View the NTP status of Device B after clock synchronization.[DeviceB] display ntp-service statusClock status: synchronizedClock stratum: 3Reference clock ID: 1.0.1.11Nominal frequency: 100.0000 HzActual frequency: 100.0000 HzClock precision: 2^18Clock offset: 0.0000 msRoot delay: 31.00 msRoot dispersion: 1.05 msPeer dispersion: 7.81 msReference time: 14:53:27.371 UTC Sep 19 2005 (C6D94F67.5EF9DB22)As shown above, Device B has been synchronized to Device A, and the clock stratum level of Device Bis 3, while that of Device A is 2.# View the NTP session information of Device B, which shows that an association has been set upbetween Device B and Device A.[DeviceB] display ntp-service sessionssource reference stra reach poll now offset delay disper**************************************************************************[12345] 1.0.1.11 127.127.1.0 2 63 64 3 -75.5 31.0 16.5note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configuredTotal associations : 1Configuring the NTP Symmetric ModeNetwork requirementsz The local clock of Device A is to be configured as a reference source, with the stratum level of 2.z Device B works in the client mode and Device A is to be used as the NTP server of Device B.z Device C works in the symmetric-active mode and Device B will act as peer of Device C. Device Cis the symmetric-active peer while Device B is the symmetric-passive peer.
