1-9To do… Use the command… RemarksConfigure the output rules ofthe system informationinfo-center source{ module-name | default }channel { channel-number |channel-name } [ debug { levelseverity | state state } * | log{ level severity | state state } * |trap { level severity | statestate } * ] *OptionalRefer to Default output rules ofsystem information.Configure the format of the timestampinfo-center timestamp{ debugging | log | trap }{ boot | date | none }OptionalBy default, the time stampformat for log, trap anddebugging information is date.Enabling the display of system information on a monitor terminalAfter setting to output system information to a monitor terminal, you need to enable the associateddisplay function in order to display the output information on the monitor terminal.Follow these steps to enable the display of system information on a monitor terminal:To do… Use the command… RemarksEnable the monitoring ofsystem information on amonitor terminalterminal monitorRequiredEnabled on the console anddisabled on the monitorterminal by default.Enable the display ofdebugging information on amonitor terminalterminal debugging RequiredDisabled by defaultEnable the display of loginformation on a monitorterminalterminal logging OptionalEnabled by defaultEnable the display of trapinformation on a monitorterminalterminal trapping OptionalEnabled by defaultOutputting System Information to a Log HostTo do… Use the command… RemarksEnter system view system-view —Enable information center info-center enable OptionalEnabled by defaultName the channel with aspecified channel numberinfo-center channelchannel-number namechannel-nameOptionalRefer to Table 1-2 for defaultchannel names.
