5-15 Logging in Through Web-based NetworkManagement SystemIntroductionAn S5810 series switch has a Web server built in. You can log in to an S5810 series switch through aWeb browser and manage and maintain the switch intuitively by interacting with the built-in Web server.To log in to an S5810 series switch through the built-in Web-based network management system, youneed to perform the related configuration on both the switch and the PC operating as the networkmanagement terminal.Table 5-1 Requirements for logging in to a switch through the Web-based network managementsystemItem RequirementStart the Web serverThe IP address of the management VLAN of the switch is configured.The route between the switch and the network management terminalis available. (Refer to the module “IP Addressing and Performance”and “IP Routing” for more.)SwitchThe user name and password for logging in to the Web-basednetwork management system are configured.IE is available.PC operating as thenetwork managementterminal The IP address of the management VLAN interface of the switch isavailable.Web Server ConfigurationLogging in Through Web-based Network Management configuration.To do… Use the command… RemarksEnter system view system-view -Add a local user and enter localuser view local-user user-name RequiredNo local user exists by default.Configure a password for thelocal userpassword { cipher | simple }passwordRequiredNo password exists by default.Configure the authorizationattributes for the local userauthorization-attribute levellevelOptionalBy default, no authorizationattribute is configured for alocal user.
