1-2At present, the detection modules is the interface management module.The interface management module is used to monitor the physical status or Layer 3 protocol status ofan interface. When the physical status or Layer 3 protocol status of an interface is up, the status of aTrack object is Positive; when the physical status or Layer 3 protocol status of an interface is down, thestatus of a Track object is Negative.Collaboration Between the Track Module and the Application ModulesYou can establish the collaboration between the Track module and the application modules throughconfiguration. If the status of the Track object changes, the Track module tells the application modulesto deal with the change accordingly.At present, the application modules that can collaborate with the Track module include:z VRRPz Static routingTrack Configuration Task ListTo implement the collaboration function, you need to establish collaboration between the Track moduleand the detection modules, and between the Track module and the application modules.Complete these tasks to configure Track module:Task RemarksConfiguring CollaborationBetween the TrackModule and the DetectionModulesConfiguring Collaboration Between theTrack Module and the InterfaceManagement ModuleRequiredConfiguring Track-VRRP CollaborationConfiguring CollaborationBetween the TrackModule and theApplication ModulesConfiguring Track-Static RoutingCollaborationRequiredUse any of the approachesConfiguring Collaboration Between the Track Module and theDetection ModulesConfiguring Collaboration Between the Track Module and the Interface ManagementModuleThrough the following configuration, you can establish the collaboration between the Track module andthe interface management module, which informs the Track module of the changes of the physicalstatus and Layer 3 protocol status of an interface.Follow these steps to configure collaboration between the Track module and the interfacemanagement module:To do… Use the command… RemarksEnter system view system-view —
