1-11 Basic ConfigurationsWhile performing basic configurations of the system, go to these sections for information you areinterested in:z Configuration Displayz Basic Configurationsz CLI FeaturesConfiguration DisplayTo avoid duplicate configuration, you can use the display commands to view the current configurationof the device before configuring the device. The configurations of a device fall into the followingcategories:z Factory defaults: When devices are shipped, they are installed with some basic configurations,which are called factory defaults. These default configurations ensure that a device can start upand run normally when it has no configuration file or the configuration file is damaged.z Current configuration: The currently running configuration on the device.z Saved configuration: Configurations saved in the startup configuration file.Follow these steps to display device configurations:To do… Use the command… RemarksDisplay the factory defaults ofthe device display default-configurationDisplay the current validatedconfigurations of the devicedisplay current-configuration[ [ configuration[ configuration ] | interface[ interface-type ][ interface-number ] ][ by-linenum ] [ | { begin |exclude | include }regular-expression ] ]Display the configuration savedon the storage media of thedevicedisplay saved-configuration[ by-linenum ]Available in any view.For details of the display saved-configuration command, refer to File System ManagementCommands in the System Volume.
