1-2Follow these steps to enable the HTTP service:To do… Use the command… RemarksEnter system view system-view —Enable the HTTP service ip http enable RequiredEnabled by default.Configuring the Port Number of the HTTP ServiceConfiguration of the port number of the HTTP service can reduce the attacks from illegal users on theHTTP service.Follow these steps to configure the port number of the HTTP service:To do… Use the command… RemarksEnter system view system-view —Configure the port number ofthe HTTP service ip http port port-numberRequiredBy default, the port number ofthe HTTP service is 80.If you execute the ip http port command for multiple times, the last configured port number is used.Associating the HTTP Service with an ACLBy associating the HTTP service with an ACL, only the clients that pass ACL filtering are allowed toaccess the device.Follow these steps to associate the HTTP service with an ACL:To do… Use the command… RemarksEnters system view system-view —Associate the HTTP servicewith an ACL ip http acl acl-numberRequiredThe HTTP service is notassociated with an ACL bydefault.
