Icom IC-R6 Instruction Manual

Also see for IC-R6: Price list Instruction manual Instruction manual Service manual

Contents

Icom IC-R6 Instruction Manual Manual pdf 11 page image

VQUICK REFERENCE GUIDEN Programmed scan operation25 pairs, 50 channels of memories are used for programmedscan operation, that specifies a scanning ranges. The pro-grammed scan scans between “xxA” and “xxB” (xx=00 to 24)frequencies. Therefore, before operating the programmedscan, different frequencies must be programmed into “A” and“B” scan edge channels.D Programming scan edgesA start frequency must be programmed into a “xxA,” and endfrequency must be programmed into a “xxB” memory chan-nel.1. Setting frequencyIn the VFO mode, set a desired receive frequency selectionmode.• When the “ ” icon is displayed, push [V/M] to select the VFOmode.2. Selecting a scan edge “A” channelHold down [S.MW](V/M) for 1 second, then rotate [DIAL] toselect one of the 25 scan edge “A” channels.• The “ ” icon and scan edge channel number blink.3. Writing a memory channelHold down [S.MW](V/M) for 1 second until 3 beeps sound.• The paired scan edge “B” channel is automatically selected whenholding down [S.MW](V/M) after programming.• When programming is completed, return to the VFO mode.4. Selecting a scan edge “B” channelHold down [S.MW](V/M) for 1 second, then rotate [DIAL] toselect one of the 25 scan edge channel “B.”• The “ ” icon and the scan edge channel number blink.• When the scan edge “B” channel is already selected in step 3. (byholding down [S.MW](V/M) after programming), skip this step.5. Writing a memory channelHold down [S.MW](V/M) for 1 second until 3 beeps sound.• The next scan edge “A” channel is automatically selected whenholding down [S.MW](V/M) after programming.• When programming is completed, return to the VFO mode.Quick reference guide