7013SPECIFICATIONS1213D GENERAL• Frequency coverage : (Unit: MHz)USA 0.100–823.995, 851.000–866.995,896.000–1309.995France 0.100–29.995, 50.200–51.200,87.500–107.995, 144.000–146.000,430.000–440.000, 1240.000–1300.000Other than above 0.100–1309.995 MHz• Number of memory channels : 1350 (incl. 50 scan edges and 200 autowrite channels)• Frequency resolution : 5, 6.25, 8.33,* 9*, 10, 12.5, 15, 20, 25,30, 50, 100, 125, 200 kHz*selectable depending on the operating frequency band.• Receive modes : FM, WFM, AM• Operating temperature range : –10°C to +60°C; +14˚F to +140˚F• Reference frequency stability : ±1.0 ppm (+25°C)• Power supply requirement : 2 AA (R6) alkaline cells2 AA (R6) Ni-MH cells4.5 to 6.3 V DC(with AC adapter or CP-18A/E)• Current drain (backlight OFF at 3.0 V DC):rated audio 130 mA typicalreceive stanby 65 mA typicalpower save (1:4) 30 mA typicalcharging 140 mA typical• Antenna connector : SMA (50 ȍ)• Dimensions : 58(W) u 86(H) u 29.8(D) mm(projections not included) 29⁄32(W)u33⁄8(H)u13⁄16(D) in• Weight (approximately) : 200 g; 7.1 oz(with supplied antenna and batteries)• Ext. speaker connector : 3-conductor 3.5 (d) mm (1⁄8s)/8 ȍD RECEIVER• Receive system : Triple-conversion superheterodyne• Intermediate frequencies : 1st : 266.7 MHz,2nd : 19.65 MHz (FM/AM),19.95 MHz (WFM)3rd : 450 kHz (FM/AM),750 kHz (WFM)• Sensitivity (except spurious points): when connecting EXT-ANTFM (1 kHz/3.5 kHz Dev.; 12 dB SINAD)1.625–4.995 MHz 0.32 μV typical5.000–29.995 MHz 0.25 μV typical30.000–117.995 MHz 0.18 μV typical118.000–246.995 MHz 0.18 μV typical247.000–469.995 MHz 0.18 μV typical470.000–832.995 MHz 0.32 μV typical833.000–1029.995 MHz 0.28 μV typical1030.000–1309.995 MHz 0.35 μV typicalWFM (1 kHz/52.5 kHz Dev.; 12 dB SINAD)76.000–108.000 MHz 1.1 μV typical175.000–221.995 MHz 1.1 μV typical470.000–770.000 MHz 1.8 μV typicalAM (1 kHz/30% MOD.; 10 dB S/N)0.495–4.995 MHz 1.3 μV typical5.000–29.995 MHz 0.89 μV typical118.000–136.000 MHz 0.63 μV typical222.000–246.995 MHz 0.63 μV typical247.000–329.995 MHz 0.79 μV typical• Selectivity :AM/FM More than 12 kHz/–9 dBLess than 30 kHz/–60 dBWFM More than 150 kHz/–6 dB• Audio output power : (at 10% distortion/3.0 V DC)Internal speaker More than 150 mW with a 16 : loadExternal speaker 80 mW typical with an 8 : loadAll stated specifications are subject to change without notice or obligation.