Icom IC-R6 Instruction Manual
Also see for IC-R6: Price listInstruction manualInstruction manualService manual
                                                                                        | |
Contents
| 
408TONE SQUELCH AND POCKET BEEP8N Tone squelch frequency/DTCS code setting88.5 Hz and 023 is set as the default for the tone squelchfrequency and the DTCS code, respectively. The frequencyand code can be selected as desired.q Hold down [SET](TS) for 1 second to enter the Set mode.w Rotate [DIAL] to select the “EXPAND” item.eWhile holding down [FUNC], rotate [DIAL] to turn theExpand set mode ON.rRotate [DIAL] to select the “TONE” item when selectingthe tone squelch frequency; select the “CODE” item whenselecting the DTCS code.After1 sec.After1 sec.Tone squelch frequency selectionDTCS code selectiontWhile holding down [FUNC], rotate [DIAL] to select adesired subaudible tone frequency or DTCS code.• See the tables at right.y Push [SET](TS) to exit the Set mode.• Available tone frequency list67.069.371.974.477.079.782.585.488.591.594.897.4100.0103.5107.2110.9114.8118.8123.0127.3131.8136.5141.3146.2151.4156.7159.8162.2165.5167.9171.3173.8177.3179.9183.5186.2189.9192.8196.6199.5203.5206.5210.7218.1225.7229.1233.6241.8250.3254.1NOTE: The receiver has 50 tone frequencies and conse-quently their spacing is narrow compared to units having38 tones. Therefore, some tone frequencies may receiveinterference from adjacent tone frequencies.• Available DTCS code list023025026031032036043047051053125131132134143145152155156162245246251252255261263265266271356364365371411412413423431432506516523526532546565606612624054065071072073074114115116122165172174205212223225226243244274306311315325331332343346351445446452454455462464465466503627631632654662664703712723731732734743754 |
Related manuals for Icom IC-R6
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine