Icom IC-R6 Instruction Manual

Also see for IC-R6: Price list Instruction manual Instruction manual Service manual

Contents

Icom IC-R6 Instruction Manual Manual pdf 71 page image

5810OTHER FUNCTIONS10D Cloning using a personal computerData can be cloned to and from a personal computer(Microsoft® Windows® 2000/XP/Windows Vista® or Windows 7)using the optional CS-R6 CLONING SOFTWARE and the option-al OPC-478/OPC-478UC CLONING CABLE. Consult the CS-R6CLONING SOFTWARE HELP file for details.D Cloning error) NOTE: DO NOT push any key on the sub-receiver duringcloning. This will cause a cloning error.When the display appears as below, a cloning error hasoccurred.In such a case, both receivers automatically return to theclone standby condition and cloning must be repeated.N Auto power-off functionThe IC-R6 can be set to automatically turn OFF after aspecified period in which no operation is performed.120, 90, 60, 30 minutes and OFF can be specified. Thespecified period is retained even when the receiver is turnedOFF by the auto power-off function. To cancel the function,select “OFF” in step e below.q Push [SET](TS) for 1 second to enter the Set mode.w Rotate [DIAL] to select the “AP OFF” item.• Turn the Expand set mode ON for selection. (p. 39)[DIAL]e While holding down [FUNC], rotate [DIAL] to select adesired time or to turn the function OFF.r Push [SET](TS) to exit the Set mode.Microsoft, Windows and Windows Vista are registered trademarks of MicrosoftCorporation in the U.S.A. and other countries.