235 MEMORY CHANNELSN Selecting display typeDuring memory mode operation, either the programmedbank name, memory name or the channel number can bedisplayed instead of the frequency display.[DIAL]Frequency displayBank name displayMemory name displayChannel number displayq Push [V/M] to select the memory mode.• If desired, push [BAND] repeatedly to select a desired bankgroup.wWhile holding down [FUNC], push [BAND] repeatedly toselect the display type from frequency, bank name, mem-ory name or the channel number.D Selecting bank channel displayDuring bank channel operation, the bank channel numbercan also be displayed, instead of the memory channelnumber.q Select the channel number display as described to theleft.w While holding down [BAND], rotate [DIAL] to select adesired bank.• The bank can also be selected by pushing [BAND] repeatedly.PushMemory channelnumber displayBank channelnumber displayBank channelnumber displayAuto write channelnumber displayWhen the selected memor ychannel has no programmed thebank name or memory name,the frequency is displayed.
