265MEMORY CHANNELS5N Transferring memory contentsThe contents of programmed memory channels can betransferred to another memory channels.qHold down [S.MW](V/M) for 1 second to enter the selectmemory write mode.• 1 short and 1 long beep sounds.• The “ ” icon and memory channel number blink.• Do not hold down [S.MW](V/M) for more than 2 seconds.Otherwise the memory contents will be copied to the VFO.wRotate [DIAL] to select a desired memory channel to betransferred.eWhile holding down [MODE], rotate [DIAL] to select the“CLEAR” item, then release [MODE].• Pushing [MODE] repeatedly also selects the “CLEAR” item.r Hold down [S.MW](V/M) for 1 second.• The displayed contents are cleared.CONVENIENT!:Instead of doing steps e and r, while holding down[FUNC], push and hold [S.MW](V/M) for 1 second alsoclears the contents.t Rotate [DIAL] to select a desired target memory channel.yHold down [S.MW](V/M) for 1 second to transfer the con-tents.[DIAL]• ExampleTransferring the contents of memorychannel 51 to channel 33.Steps q and wStep eStep rStep tStep y
