Icom IC-R6 Instruction Manual

Also see for IC-R6: Price list Instruction manual Instruction manual Service manual

Contents

Icom IC-R6 Instruction Manual Manual pdf 35 page image

225MEMORY CHANNELS5Each memory channel can be programmed with an alpha-numeric channel name for easy recognition, and can be dis-played independently by channel. Names can be a maximumof 6 characters.q Push [V/M] to select the memory mode.w Rotate [DIAL] to select a desired memory channel.eHold down [S.MW](V/M) for 1 second to enter the selectmemory write mode.• 1 short and 1 long beep sound.• The “ ” icon and memory channel number blink.rWhile holding down [MODE], rotate [DIAL] to select the“M NAME” or “B NAME” item when programming thememory name or the bank name, respectively.• The item can also be selected by pushing [MODE] repeatedly.Bank name selectionMemory name selection• After releasing [MODE], a line blinks under the first digit, andthe “ ” icon blinks.t While holding down [FUNC], rotate [DIAL] to select adesired character.• The selected character blinks.y Rotate [DIAL] to move the cursor to the left or to the right.Bank nameMemory nameu Repeat steps t and y until a desired 6-character chan-nel name is displayed.i Push [MODE] repeatedly, or rotate [DIAL] while holdingdown [MODE] to select the “S.MW” item.o Hold down [S.MW](V/M) for 1 second to program thename and exit the programming mode.• 3 beeps sound.• Available charactersA to Z, 0 to 9, ( , ) , , +, –, , /, |, = and space.NOTE: Only one bank name can be programmed intoeach bank. Therefore, the previously programmed bankname will be displayed when bank name is selected. Also,the programmed bank name is automatically assigned toanother bank channel.N Programming memory/bank name